Our country pages
You can order up to 3 free sample tiles.
We'll aim to deliver your sample order within 5-7 working days from your order date.
Thick fleece provides protection to the waterproofing membrane below
Retains water, (approx 2l/m2), and therefore reduces water run off
Rotproof making it resilient and long lasting when installed
Made from 100% recycled plastic fibre (PP/PES/acrylic)
Do you have questions about the product, systems or anything else?
We're here to help - contact us and one of our experts will help you.
Base Unit Of Measure | MTK |
Coverage | 100 m² |
Diameter | 0.45 m |
Length | 50 m |
Width | 2 m |
Material Type | Mixed fibre fleece (PP, PES and acrylic recycled fibres) |
Method of application | Handle with care to avoid any damage. Where required, the Canopia Protection Layer is rolled out and cut to shape, ensuring that drainage outlets are not covered. The Canopia Protection Layer should be overlapped by at least 150mm on top, bottom and sides. Be careful to NOT damage the waterproofing membrane when making any cuts, and we advise the use of a protection board to prevent this. |
Thickness | Approx. 3.6mm |
M2 per pallet | 600 m2 per euro pallet |
Qty per pallet | 6 rolls per euro pallet |
m2 per pack | 100 m2 per roll |
Codes of Practice | The GRO Green Roof Code |
Designated application | Used as a protective layer on waterproofing with an additional separating and water reservoir function. It provides separation of products made from incompatible materials (e.g. PVC and bitumen). |
Uniclass reference | Pr_25_57_85_10 |
Gross Weight | 0.300 kg |
Weight Per Piece | Approx. 30 kg |
Weight Per Square Metres | 300 g |
Do you have questions about the product, systems or anything else?
We're here to help - contact us and one of our experts will help you.
Title | Size | Actions | |
---|---|---|---|
TDS-Canopia-Protection Fleece 300 | 143.93 kB |
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.