Our country pages
You can order up to 3 free sample tiles.
We'll aim to deliver your sample order within 5-7 working days from your order date.
The Canopia ST Wildflower Plug and Seed System provides a wildflower meadow to encourage a diverse range of flora and fauna using wildflower /grass plug plants and seed mix to allow greater flexibility of design. It is suitable for use on specified Icopal root-resistant flat roof waterproofing systems.
1. Canopia Protection Fleece RMS 300
Canopia Protection Fleece 300 is used as a separation and protection layer to reduce any point loadings on the waterproofing membrane that sits below it.
2. Canopia Drainage Board 20
Canopia Drainage Board 20 is used as a water reservoir and drainage board.
3. Canopia Filter Fleece FIL105
Canopia Fliter Fleece 105 is used as a filter fleece to reduce the amount of fines particles reaching the drainage layer, and as a separation layer betwen pebble borders and the growing substrate.
4. Canopia Extensive Substrate
Canopia Extensive Substrate is blended growing medium designed to provide a balance of water retention and drainage to create the ideal root environment for succesful plant growth.
5. Canopia Biodiverse Plug Plants
Canopia Biodiverse Plug Plants are a mixture of wildflowers and grasses supplied as small plugs growing in trays used for planting up green roofs.
6. Canopia Wildflower Seed Mix
Canopia Wildflower Seed Mix is used for sowing onto green roofs to provide a selection of different wildflower species.
7. Canopia Aluminium Edge Detail (100mm)
Canopia Aluminium Edge Detail (100mm) is an 100mm high aluminium angle, used to retain green roof build up and separate it from other areas including pebble borders. Suitable for use on roofs with a maximum pitch of 5 degrees.
8. Canopia Aluminium Connector (100mm)
Canopia Aluminium Connector (100mm) is required to fix the lengths of Canopia Aluminium Edge Detail (100mm) together. One connector is required per section of trim.
9. Canopia Washed Pebbles (20-40mm)
Canopia Washed Pebbles (20-40mm) are natural aggregates used to improve drainage flow rates around green roof details and create vegetation free borders and firebreaks.
Using wildflower/grass plug plants and seed mix allows flexibility in design and species layout
Provides visual interest with differing flower colours and leaf forms
Provides a diverse habitat and pollen /nectar source for a wide range of invertebrate species
The wildflower /grass seed mix is sown between the plug plants to promote further beneficial plant colonisation
Product Page URL | https://www.bmigroup.com/uk/s/canopia-st-wildflower-plug-and-seed-system-1848016874 |
Maximum Pitch | 5 degrees (pitches above 5 degrees may need anti-slip measures). |
Minimum Pitch | Minimum design fall of 1:40. |
Scoring Weight | 90 |
System Type | Extensive Green Roof System |
Technology | Wildflower Plug Plant and Seed System |
Dry System Weight | Approx. 90kg/m2 |
Fire performance | The system has the potential to achieve an external fire performance of B roof (t4) in accordance with DCLG Guidance. Note: This is a system test, please contact BMI Icopal Technical Services to verify that the chosen system and design has the potential to meet your required performance prior to commencement of works. |
Roof Type | Suitable for warm and cold roof build up's |
Saturated System Weight | Approx. 145kg/m2 |
Substrate Depth (Settled) | 100mm |
Typical System Depth | Approx. 122mm (excluding vegetation height) |
Uniclass reference | Ss_45_40_47_28 |